Once you determine 0.1mm exposure value, you can find 0.05mm.
A good starting point for 0.05mm layer height is keep laser power the same, and increase print speed to 130mm/s (moai 0.05mm profile does that.)
For a quick way to find the exposure for 0.025mm layer height, increase print speed to 200mm/s or more. However, this is the optimal for 0.025mm and you may have to lower laser power to get better results.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.