Help
Editing Step 5 —

Step Type:

Drag to rearrange

We recommend start testing keeping print speed at 85mm/s for layer height = 0.1mm . This can be done using standard Moai print profile for 0.1mm

drop laser power to 42 for DLP resin

drop laser power to 55 for Laser resin

test print this ring stl file: https://drive.google.com/open?id=0Bzke6l...

Make sure vat is leveled before test print

If the printer is making a very loud popping noise during each layer, especially if the noise persists after 10 layers, you may be over-curing the resin. This wears out the silicone layer in the vat much quicker. Stop if needed to double check curing on the build plate.

Your contributions are licensed under the open source Creative Commons license.