Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

Thank you for join Moai user community. We hope this guide will help you build your Moai and help you learn about SLA printing

Video Overview

    • This is your Moai kit. Please check for any shipping damage

    • Sometimes the delivery person may place the box in the wrong orientation. Please make sure the box's longest side is sitting on the floor with the shipping label facing up.

  1. Please use this list to check your contents Be Careful pulling the Galvos out. DO NOT TOUCH the mirrors in any way. Use the pictures here as reference
    • Please use this list to check your contents

    • Be Careful pulling the Galvos out. DO NOT TOUCH the mirrors in any way.

    • Use the pictures here as reference

    • Use this video as reference

    • Please use this guide for Moai hardware installation

    • This is the most time consuming part of the guide. Please allow 4-5 hours for this step.

    • You can watch this build video by Chris Russell to go with the manual.

    • Do not overfill the resin tank or you will have a mess dripping all over your electronics. When the build plate drops the resin level rises significantly.

    • As the community gains more experience using Moai, we will develop even better printer settings and profiles. Please visit our forum link below for the latest systems, profiles and software:

    • latest settings, profiles and software

    • Insert wisdom here.

Shu Peng

Member since: 07/06/2017

809 Reputation

4 Guides authored

View Statistics:

Past 24 Hours: 8

Past 7 Days: 17

Past 30 Days: 86

All Time: 34,488